Removing The Left Engine Case - KTM 2014 690 SMC R EU Repair Manual

16 ENGINE

16.3.30 Removing the left engine case

–
Remove screws
–
Take off the oil pump cover.
305628-10
–
Remove oil pump shaft
–
Remove external rotor
305629-10
–
Remove screws
–
Swing the left section of the engine case up and remove the nut or screw of the
engine fixing arm.
305632-10
–
Install special tool
Extractor (75029048000) (
Info
Use the 750 drill hole.
–
Pull off the section of the engine case.
Info
305633-10
Do not tension the section of the engine case.
The balancer shaft and the main shaft have a stop disk; these usually stick
to the bearing.
–
Take off the left section of the engine case.
–
Remove the special tool.
–
Remove dowels
–
Remove O-ring
305634-10

.

with the internal rotors.

.
 .

with suitable screws.
p. 235)
 .

.
123