Removing The Timing Chain Rails; Removing The Timing Chain And Timing Chain Sprocket - KTM 2014 690 SMC R EU Repair Manual

16 ENGINE

16.3.18 Removing the timing chain rails

16.3.19 Removing the timing chain and timing chain sprocket

–
Mount the special tool
Extractor (58429009000) (
–
Hold it tight using the special tool and pull off the rotor by turning the screw in.
–
Remove the special tool.
305562-10
–
Remove screws
–
Pull the timing chain guide rails
Info
The support bushing is plugged into the timing chain securing guide
through the timing chain guide rails.
–
Remove the timing chain guide rails upward out of the timing chain shaft.
305565-10
–
Hold the timing chain securing guide tight and pull the timing chain tensioning

rail out of the timing chain securing guide.
–
Remove the timing chain tensioning rail upward out of the timing chain shaft.
–
Remove the timing chain securing guide.
305566-10
–
Slip out timing chain
Info
If the timing chain will be used again, mark the direction of travel.
305569-10
–
Take off lock ring
305570-10

on the rotor.
p. 229)

.

out of the timing chain securing guide

.

.
117

.