8
SHOCK ABSORBER, SWINGARM
8.8
Adjusting the riding sag
8.9
Removing the shock absorber
Preparatory work
–
Raise the motorcycle with the work stand. (
–
Remove the seat. (
–
Take off the side cover. (
–
Remove the shock absorber. (
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate
Medium (standard)
Hard
Info
The spring rate is shown on the outside of the spring.
201352-10
Finishing work
–
Install the shock absorber. (
–
Mount the side cover. (
–
Mount the seat. (
–
Remove the motorcycle from the work stand. (
–
Check the static sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
Preparatory work
–
Raise the motorcycle with the work stand. (
–
Remove the seat. (
–
Take off the side cover. (
Main work
–
Remove screws
–
Take off grab handle
G00821-10
–
Remove screws
G00816-13
p. 61)
p. 62)
p. 36)
p. 37)
p. 62)
p. 62)
p. 61)
p. 62)
.
.
.
p. 11)
80 N/mm (457 lb/in)
85 N/mm (485 lb/in)
p. 12)
p. 34)
p. 34)
p. 11)
36