Table of Contents
Advertisement
16
ENGINE
Main work
–
Position the engine in the frame.
G00848-10
–
Mount swingarm pivot.
–
Mount the screw of swingarm pivot
–
Mount screw connection
Info
You should have an assistant for this step.
Make sure that the motorcycle is sufficiently secured against falling over.
Protect the frame and attachments from damage.
G00847-11
–
Remove the floor jack with the special tool.
Floor jack attachment (75029055000) (
G00846-10
–
Position the engine bearer.
–
Mount and tighten screws
Guideline
Screw, engine bearer on frame
–
Mount and tighten fitting
Guideline
Engine carrying screw
G00845-11
–
Tighten the screw of swingarm pivot
Guideline
Screw, swingarm pivot
–
Tighten fitting
Guideline
Engine carrying screw
–
Position the line with the oil pressure sensor. Mount and tighten connection
Guideline
Oil pressure sensor line
–
Position the clamp of the oil line. Mount and tighten screw
tor.
Guideline
Remaining screws, chassis
G00844-11
but do not tighten yet.
of the lower engine attachment but do not tighten yet.
.
.
M10
.
of the lower engine bracket.
M10
p. 235)
M10
45 Nm
(33.2 lbf ft)
45 Nm
Loctite
(33.2 lbf ft)
M12
80 Nm (59 lbf ft)
45 Nm
Loctite
(33.2 lbf ft)
M10x1
10 Nm (7.4 lbf ft)
. Plug in the connec-
M6
10 Nm (7.4 lbf ft)
108
®
243™
®
243™
.
Advertisement
Table of Contents
