16
ENGINE
–
Take off the engine sprocket.
–
Remove screws
–
Remove cable binder
–
Take off the clutch slave cylinder with the gasket and hang it to the side.
Info
Do not kink the clutch line.
Do not activate the clutch lever if the clutch slave cylinder has been
removed.
–
G00838-10
Take off the clutch push rod.
–
Pull back the protection cap. Remove nut
–
Remove screw
G00839-10
–
Loosen hose clip
–
Pull off the throttle valve body from the rear.
G00840-10
–
Disconnect plug-in connector
sensor, and alternator.
G00841-10
–
Detach the spark plug connectors.
–
Unplug the connector of the engine coolant temperature sensor
G00842-10
–
Loosen the spring band clamps
Pliers for spring band clamp (60029057100) (
G00843-10
.
.
.
.
of the gear position sensor, crankshaft position
using the special tool.
.
.
p. 231)
106