Removing The Gear Position Sensor; Removing The Oil Filter; Removing The Thermostat; Setting Engine To Ignition Top Dead Center - KTM 2014 690 SMC R EU Repair Manual

16 ENGINE
16.3.7

Removing the gear position sensor

16.3.8

Removing the oil filter

16.3.9

Removing the thermostat

16.3.10 Setting engine to ignition top dead center

–
Remove screws
–
Remove gear position sensor
201959-11
–
Remove screws
–
Take off the oil filter cover with the O-ring.
–
Remove oil filter
Circlip pliers reverse (51012011000) (
305526-10
–
Remove screws
–
Take off the oil filter cover with the O-ring.
–
Remove oil filter
Circlip pliers reverse (51012011000) (
305549-10
–
Remove screws
–
Take off the thermostat case.
–
Remove thermostat
305528-10
–
Turn the crankshaft counterclockwise until markings
with the marks of the camshaft support plate.
305531-10

with the washers.
 with the O-ring.

.

.

.

.

.

.
p. 229)
p. 229)

of the camshafts are flush
113