Installing The Engine - KTM 2014 690 SMC R EU Repair Manual

16 ENGINE
16.2

Installing the engine

–
Detach connector
–
Release connection
G00844-10
–
Remove screws
G00845-10
–
Position the floor jack under the engine and fix it using the special tool.
Floor jack attachment (75029055000) (
G00846-10
–
Remove nut
G00847-10
–
Lower the engine.
Info
You should have an assistant for this step.
Make sure that the motorcycle is sufficiently secured against falling over.
Protect the frame and attachments from damage.
G00848-10
Preparatory work
–
Raise the engine onto the special tool and fix it.
Floor jack attachment (75029055000) (

of the oil pressure sensor. Remove screw

. Remove the line with the oil pressure sensor.

. Remove the engine bearer.
 
and screw of the lower engine bracket.

.
p. 235)
p. 235)
107