Disconnecting The Battery; Connecting The Battery; Recharging The Battery - KTM 2014 690 SMC R EU Repair Manual

13 WIRING HARNESS, BATTERY
13.3

Disconnecting the battery

13.4

Connecting the battery

13.5

Recharging the battery

Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Warning
Environmental hazard The battery contains elements that are harmful to the environment.
–
Do not discard batteries with the household waste. Dispose of faulty batteries in an environmentally compatible manner.
Give the battery to your authorized KTM dealer or dispose of it at a collection point for used batteries.
–
Position EFI control unit
–
Mount battery cover
B01976-10
Finishing work
–
Mount the seat. (
–
Set the clock. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
–
Disconnect the negative (minus) cable
Info
Never operate the motorcycle with a discharged battery or without a battery.
In both cases, electrical components can safety equipment can be dam-
aged. The vehicle is therefore no longer roadworthy.
G00800-10
Main work
–
Reconnect minus cable
G00800-10
Finishing work
–
Mount the seat. (
–
Set the clock. (

.

.
p. 62)
p. 99)
p. 61)
 of the battery.

.
p. 62)
p. 99)
83