KTM 2014 690 SMC R EU Repair Manual page 33

7 HANDLEBAR, CONTROLS
–
Tighten screw
G00784-10
–
Connect plug-in connector
–
Route the wiring harness of the accelerator position sensor without tension.
G00782-10
–
Secure the cable with the cable binders.
G00781-10
–
Position the combination instrument in the holder.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
G00783-10
–
Mount and tighten screw
Guideline
Remaining screws, chassis
G00780-10
–
Position the side cover.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
G00779-10

.

.

.

.

.
M4 4 Nm (3 lbf ft)
M4 4 Nm (3 lbf ft)
M6 10 Nm (7.4 lbf ft)
31