8
SHOCK ABSORBER, SWINGARM
8.13
Dismantling the damper
Preparatory work
–
Remove the spring. (
Main work
–
Establish and note the current state of the rebound damping and compression
damping.
–
Completely open the adjusters of the rebound and compression damping.
–
Remove rubber cap
–
Open screw
The pressurized nitrogen escapes.
201273-10
–
Clamp the damper in the vise using soft jaws.
–
Remove locking cap
201274-10
–
Press in seal ring retainer
Info
Do not scratch the inner surface.
201276-10
–
Remove screw
201277-10
–
Remove the piston rod. Drain the remaining oil.
201278-10
p. 39)
of the reservoir.
slowly.
.
. Remove lock ring
. Drain the oil.
.
40