Table of Contents
Advertisement
16
ENGINE
–
Change the freewheel gear and/or the bearing.
–
Check freewheel
when removed for damage and wear.
»
If there is damage or wear:
–
Change the freewheel.
–
Check the toothing of starter motor
»
If there is damage or wear:
–
Change the starter motor.
–
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Briefly connect the positive cable of the
power supply to the starter motor connection.
»
If the starter motor does not turn when the circuit is closed:
–
Change the starter motor.
–
Change O-ring
of the starter motor.
16.4.40 Checking freewheel
16.4.41 Removing freewheel
16.4.42 Installing freewheel
for damage and wear.
–
Insert the freewheel gear
clockwise; do not twist!
–
Check the locking action of the freewheel gear
»
If the primary gear does not turn clockwise or if it does not lock counterclock-
wise:
–
Remove the freewheel. (
–
Turn the freewheel 180°.
–
Install the freewheel. (
300131-10
–
Extract the lock ring
300127-10
–
Compress the expansion ring
–
Take the freewheel
300128-10
–
Lubricate all parts thoroughly.
–
Push the freewheel
Info
Note the direction of rotation.
300129-10
in the primary gear
p. 153)
p. 153)
from the groove using suitable pliers.
and remove it, using suitable pliers.
out of the primary gear.
into the primary gear.
, turning the primary gear
.
153
Advertisement
Table of Contents
