Table of Contents
Advertisement
6
FORK, TRIPLE CLAMP
Main work
–
Loosen screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Fully tighten screw
Guideline
G00790-10
Screw, top triple clamp
–
Mount and tighten screw
Guideline
Screw, steering stem
Finishing work
–
Check the steering head bearing play. (
–
Release the rear of the vehicle.
–
Remove the motorcycle from the work stand. (
. Remove screw
.
.
.
.
M20x1.5
12 Nm (8.9 lbf ft)
M8
17 Nm
(12.5 lbf ft)
M8
20 Nm
(14.8 lbf ft)
p. 26)
p. 12)
27
Advertisement
Table of Contents
