16
ENGINE
–
Mount the engine sprocket with the chain.
–
Position the new lock washer and mount nut but do not tighten yet.
–
Position the rear wheel.
–
Mount the chain adjuster and nut.
–
Push the rear wheel forward so that the chain adjusters rest against the tensioning
screws, and tighten nut
Guideline
Nut, rear wheel spindle
G00837-11
–
Have an assistant operate the rear brake.
–
Tighten nut.
Guideline
Nut, engine sprocket
–
Secure the nut with lock washer
G00836-11
–
Position the engine sprocket cover.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Mount and tighten screw
Guideline
Remaining screws, chassis
G00835-11
–
Position the shift lever.
–
Mount and tighten screw
Guideline
Screw, shift lever
–
Mount and tighten screw
Guideline
Screw, upper radiator bracket
G00834-11
–
Position the radiator hoses. Mount the spring band clamps
Pliers for spring band clamp (60029057100) (
–
Install the manifold. (
–
Disconnect the battery. (
G00833-11
.
M25x1.5
M20x1.5
80 Nm
(59 lbf ft)
.
.
M8
.
M6
.
M6
14 Nm
(10.3 lbf ft)
.
M6
p. 54)
p. 83)
90 Nm
(66.4 lbf ft)
Loctite
®
243™
25 Nm
(18.4 lbf ft)
10 Nm (7.4 lbf ft)
Loctite
®
243™
10 Nm (7.4 lbf ft)
.
p. 231)
110