Table of Contents
Advertisement
Hour Mode Selection
Operation
While on a line, the green lamp for that line is I-Use flashing (double wink rate):
1. Press [HOLD]. The green lamp now flashes at a slow rate and the call is placed on
System Hold.
Conditions
Pressing [HOLD] will place a conference on Exclusive Hold if you are the controlling
party and you temporarily exit to add another party.
When an intercom call (conference) is placed on Hold, the steady lamp indication of
the other station(s) will not change.
Hour Mode Selection
Description
Standard 12-hour time or military 24-hour time can be selected for common display at all
Executive Key Telephones. The correct system time is entered in system programming
along with the Hour Mode Selection, from any Executive Key Telephone station using the
system programming password. The AM and PM indications are not displayed.
Station Hunt Groups
Description
Up to 8 hunt groups may be assigned. Hunting is always in a linear fashion. Each Hunt
Group can contain up to 24 members. Hunt Group directory numbers are (82-89) or (800-
807). One Hunt Group may be assigned as a Voice Mail type Hunt Group for system voice
mail integrated operation. There are 3 data fields in Hunt Group programming: GROUP
TYPE, GROUP MEMBER and RING ASSIGNMENT.
I-Hold Indication
Description
I-Hold Indication allows you to easily distinguish between a call you placed on hold at
your telephone and calls placed on hold at other telephones. When you place a call on
System Hold, the associated line lamp will flash at the System Hold rate but will light
green. The same held CO line at other stations will flash at the System Hold rate but will
light red.
Any party who is placed on Hold will hear music, only if available through the external music
source connection.
When programming related features, military 24-hour time is referenced.
4-65
Advertisement
Table of Contents
