Table of Contents
Advertisement
CO Line Configuration
CO Line Configuration
If the system is in the programming mode, continue using the [back] and [next] Soft
Buttons to scroll to the desired programming field. If starting to program here, enter the
programming mode.
Refer to
complete list of programmable features and their default values.
CO Line Parameters
This section allows the programming of various CO Line Attributes so that the system
may be customized to meet the clients needs.
Default
The DHS CO range is from 01-12, and the DHS-E CO range is from 700-717.
Dialing Type Selection
Dialing type is a selection of either Tone (DTMF) dialing or Pulse (Rotary) dialing.
Default
The
DHS/DHS-E
Tone /Pulse.
Call Abandon
Call Abandon is a CO line setting that monitors the CO line for distant party hang up.
When set to Y the
interruption in loop current. When an interruption occurs that is at least as long as the
programmed Call Abandon Time, the system recognizes that interruption as distant party
disconnect and forces the CO line on-hook.
Default
DHS/DHS-E
Program Mode
Entry. Also, refer to
The moment the [chg] button is pressed and the value displayed, that operation becomes
functional (this is true for any database field where the [chg] button selects from the
available data field values). In other areas of programming where data is entered from the
dial pad, the [save] Soft Button must be pressed to save that entered data.
Dialing Type is set for Tone (DTMF) Dialing, and can be toggled from
DHS/DHS-E
Call Abandon is set to Y for all CO Lines, and can be toggled from Y/N.
This feature is especially useful with Voice Mail operation because the system will send
disconnect digits to a VM port when loop current interruption is detected.
Table 6-1: Database Programming Table
will monitor that CO line throughout the call duration for
6-17
for the
Advertisement
Table of Contents
