Table of Contents
Advertisement
3-26
Remove the components from the carton and determine which mounting components
are required. Most telephones are installed with both mounting wedges.
High Profile Mount
For the High Profile Mounted position, reference the illustration below and attach the
Base Mount wedges.
1. The small wedge is always used for the various telephone mounting positions.
2. The small wedge has locking tabs at one end and hooks at the other end used in a
hinging fashion.
Wall Mount
When the telephone is to be Wall Mounted:
The two wedge mount assemblies (large and small) are affixed at the factory. This
configuration is used for High Profile Desk Mounting.
Figure 3-6: High Profile Mount
Figure 3-7: Wall Mount
DHS-E Installation
Advertisement
Table of Contents
