Table of Contents
Advertisement
Background Music
Background Music
Description
When your telephone is idle and the feature is enabled and activated, you can hear
background music (BGM) through the loudspeaker. You can use the feature code to
select between BGM Channel 1, BGM Channel 2 (if the system is so equipped), and No
BGM. The BGM automatically turns OFF when you receive or make a call. BGM turns on
again when the telephone is idle.
Operation
To enable/disable:
1. Press [FEAT]
2. Dial [5] + [2]
Busy Lamp Field (BLF)
Description
Depending on user requirements, any Programmable Feature Button can be
programmed as a Busy Lamp Field (BLF) button to monitor a station's status. When the
programmed station is off-hook or in Do Not Disturb (DND), the button LED will light red.
This same button is used as a one-button Direct Station Selection (DSS) call button for
quick inside calling.
Combination DSS/BLF
Description
Any feature button may be programmed as a combination DSS/BLF button. The DSS/BLF
button allows you to call a specific station with the touch of one button. This same
button will light whenever the associated station is busy (off-hook) or in the Do Not
Disturb mode.
If a feature button is programmed for BGM, the lamp for that button will not light to indicate
BGM is activated. Hearing the BGM will be your confirmation that the feature is activated.
The DHS requires the Option Module to support the second BGM Channel. The DHS-E
supports 2 BGM Channels.
Each station has a default feature button mapping, refer to Chapters 2 and 3, DHS and DHS-
E Description and Installation, to determine the default map of the telephone models.
4-17
Advertisement
Table of Contents
