Table of Contents
Advertisement
4-84
3. Press [save].
Conditions
When your telephone is locked you can only make intercom calls. You may still
answer calls and held lines while your telephone is locked. This includes speed dial
access and CO lines marked as toll override.
If you accidentally forget your password it may be retrieved through the system
database administration password.
The Attendant designated station private password is used to enter Attendant
Administration.
If you try to make a CO line call from a locked telephone, you will hear error an tone
and the display will show PHONE LOCKED.
Privacy
Description
Factory default settings provide privacy for all intercom and CO line calls. These calls may
not be monitored or interrupted by other stations. If your COS allows, and if the Privacy
Release and Voice Over Busy features are available to you, as determined by your
programmed COS, you may use those features to override the Privacy feature.
Privacy Release
Description
Privacy Release may be enabled on a system-wide basis to allow up to three users to join
a conversation on busy CO lines (maximum of 4 users). When Privacy Release is enabled
through programming, you may press a busy CO line button at an idle telephone to join
that conversation.
Your programmed COS determines whether you have access to Privacy Release. If your
COS is equal to or greater than that of the station engaged in the conversation on the CO
line, you will be allowed to join the conversation.
Operation
When you want to join a conversation on a busy CO line:
The Phone Lock feature code may be programmed on a programmable feature button.
Privacy
Advertisement
Table of Contents
