Table of Contents
Advertisement
ADP Modular Jack
3. Dial [7] +[1].
4. Dial account code.
5. From an Enhanced Telephone, press [✳]. From an Executive Telephone, press [save].
6. If an error occurs, you may re-dial a new account code by returning to Step 1 in this
procedure.
ADP Modular Jack
Description
All key telephone types are equipped with an Analog Device Port (ADP) jack. The ADP
jack is an open, twisted-pair conductor path that may be extended from the KSU via the
second pair of the station cabling. The ADP may be used to extend a SLT system station
port or CO line to the digital key telephone desktop for convenient connection of any
analog interface device (answering machine, modem, facsimile machine, etc.).
The standard 2-pair key telephone mounting cord (line cord) provided with each key
telephone extends the second station cable pair to the key telephone ADP jack. Any
analog device connected to the ADP jack operates independently of key telephone
operation.
Alarm - Station
Description
You may activate your own private alarm on your telephone to remind you of special
appointments, events, etc. When the alarm activates, you will hear tone ringing for 6
seconds. After the 6 seconds, the alarm is automatically canceled. If you desire the alarm
to sound at the same time everyday, you must program it each day.
Operation
Basic and Enhanced Telephones
To turn ON a signaling alarm:
1. Press [FEAT]
2. Dial [9] + [2]
3. Dial HHMM where HH is hour, MM is minute (24-hour clock).
To turn OFF a signaling alarm:
When the alarm time is reached, you will hear tone ringing.
1. Press [FEAT]
2. Dial [✳ + [9] +[2]
At an Executive Telephone, you may press [bksp] to erase each number in the account code,
or press [chg] to erase the entire account code.
The ADP jack of any telephone may be wired for connection to the main telephone CO line
for use as a power failure standard telephone interface in the event of a power outage.
4-9
Advertisement
Table of Contents
