Table of Contents
Advertisement
Call Brokering
Call Brokering
Description
Single Line Telephone (SLT) station users may connect to a second party and alternate
between connections. This feature is desirable when an SLT user wants to maintain the
connection of the parties and at the same time keep them separate from each other.
Operation
While engaged on an intercom or CO line call:
1. Press Hook Flash. The original conversation party is placed on hold.
2. Dial the next station or CO line call.
When the new party answers:
1. Press Hook Flash to be connected to the first party and place the new call on hold.
Call Forward
Description
The SLT user may forward telephone calls to another station, VM or Hunt Group using 4
call type criteria. The SLT user may also use Follow Me Forward to extend calls at another
station to this station.
Operation
Calls to this station will follow the forward scheme selected.
To setup Call Forward modes:
1. Lift handset
Busy
1. Dial [#] +[2] + [1] + [xx]
Where:
xx = destination desired
Busy/No Answer
1. Dial [#] + [2] + [5] + [xx] + [t]
Where:
xx = destination desired
t = time to ring before forwarding in the no answer scenario: 0 = 10 seconds, 1=20
seconds, 2=30 seconds, 3=40 seconds and 4=50 seconds.
The user at the forwarded station will hear special Intercom Reminder tone signifying that
Call Forward is activated.
5-5
Advertisement
Table of Contents
