Table of Contents
Advertisement
DHS Technical Specification Tables
DHS Technical Specification Tables
System Programming Memory Protection
Ports:
CO/PBX/Centrex Lines
Digital Stations
Standard SLTs
DSS Console
DTMF Receivers:
2-Port CO Module
2-Port Analog Expansion
Option Module
DTMF Senders
Tone Detectors (used to monitor call progress
tones: Busy Tone, Ring-back Tone, etc.)
Contacts
Conference Circuits
DISA Circuits
Table 2-2: Digital Hybrid System Capacities
Component
Description
300 Hours on a fully-charged battery (internal
Nicad/Nimh battery requires 14 continuous-
powered hours of system operation to
become fully charged.)
12 (Note: 16 stations max. with this
configuration.)
24 (Note: 9 CO lines max. with this
configuration.)
46 (Note: one digital port must be reserved
for digital station operation. One digital
station port is used for every 2 SLT ports
required.)
12 (Note: one for each digital station.)
2 (One for each SLT port)
2 (One for each SLT port)
2 (Shared for advanced call processing system
features; DISA, ECF)
Unlimited. (DTMF signal generation is derived
from the core system tone resource. Tone
combinations are available as needed.)
2 (Shared for advanced call processing system
features; DISA, ECF, ABR. etc.)
Located on the Option Module
1 LBC contact is available via the Option
Module.
Four-party conference circuits (8 per system).
Any number of CO lines may be programmed
for DISA operation.
2-13
Advertisement
Table of Contents
