Table of Contents
Advertisement
Hold
To answer Hold Recall at an SLT, lift the handset (refer to
and Operation, "Transfer").
This feature may need to be adjusted on some telephones for proper operation (refer
to
Chapter 6, System
Retrieve
Description
Since multiple calls may be placed simultaneously at an SLT, the Call Hold Receive feature
may be used to access a call previously placed on Hold.
Operation
When the SLT user wishes to retrieve a held call:
1. Lift the handset, ICM dial tone is heard.
2. Dial [✳] + [6]
3. Talk with the original held party.
If no intercom/CO line call has been placed on hold by the user or if the line on hold has
been picked up elsewhere:
1. Lift handset, an ICM dial tone is heard.
2. Dial [✳] + [6], an error tone is heard.
Retrieve from Another Station
Description
This feature is used to access CO lines that are placed on hold at other stations.
Operation
To pick up a held call at another station:
1. Lift handset
2. Dial [✳] + [7]
3. Dial station number where call is holding.
Programming,
If no CO Line call is holding at that station, error tone is heard.
Chapter 4, Keystation Features
"Call Handling
Configuration").
5-11
Advertisement
Table of Contents
