Table of Contents
Advertisement
Intercom Call
Cancel
1. Lift the handset
2. Dial [#] + [#] + [4]
Operation
1. Go off-hook
2. Wait for the delay time to expire.
Conditions
Operation of Hot Line to a Station, Speed Dial Bin or CO line, that is not valid or
programmed, results in an error tone.
If the programming parameter SYSTEM TYPE is set to KEY, you will hear an error tone
if the Hot Line feature is set for a CO line group.
If the SYSTEM TYPE was set to PBX but later changed to KEY, operation of Hot Line to
a CO line group will not be allowed when you setup CO line group operation.
If used for 911 (emergency), it must be tested regularly to verify proper operation.
Intercom Call
Description
The SLT user can make Intercom Calls by going off-hook (intercom dial tone) and dialing
the Intercom Station Number of the desired station.
Operation
1. Lift handset
2. Dial the desired station, Hunt Group or VM Group number.
Last Number Redial (LNR)
Description
The Last Number Redial (LNR) feature automatically dials the last number dialed from
that telephone. A maximum of 16 digits can be stored in the LNR buffer for every station.
Operation
1. Lift handset
2. Dial [#] + [8]
5-13
Advertisement
Table of Contents
