Table of Contents
Advertisement
4-32
If several calls of the same priority are ringing at the station, the calls are answered in the
order they are received.
Direct
1. Press [FEAT].
2. Dial [5] + [3]. At an Executive Telephone, the display will show:
3. Dial the station number to pick up the call.
Group
1. Press [FEAT].
2. Dial [5] + [4].
Call Waiting
Description
You will hear a notification tone through the speaker whenever an inside caller is waiting
and this feature is enabled. You may accept or reject the call using the display soft
buttons. This feature affects the Voice Over Busy feature. When you prefer off-hook tone
signaling, activate the Call Waiting feature to prevent inside parties from invoking the
Voice Over Busy feature (unless there is another ICM call currently waiting for the same
station.
Operation
1. To enable Call Waiting, Press [FEAT].
2. Dial [6] + [8]. The display will show:
To disable Call Waiting:
1. Follow Steps 1 and 2 above to also disable the feature. The display will show CALL
WAIT DENY.
Using Stations 12 and 16 as an example, while Station 16 is busy:
1. Station 12 makes an intercom call to Station 16.
2. Station 12 hears a ringback tone and the display shows:
DI RE CT P ICKUP
The Call Pickup feature code may be programmed on any programmable feature button.
C AL L WAIT AL LO W
STA
cbck
msg
16 WAIT
Call Waiting
Advertisement
Table of Contents
