Table of Contents
Advertisement
2-24
Six conductor modular jack assemblies for all station instruments (recommended).
Standard punch-down terminal block(s), 66M1-50 type, as required.
Industry-standard, 25-pair cable(s) with a 50-pin male amphenol/AMP type
connector for connection from each equipped 3 x 8 module to the MDF.
AC voltage surge/spike protector.
Standard telephone hand tools and mounting hardware for the KSU, MDF backboard,
punch-down terminal block(s), modular jack assemblies for CO lines, etc.
Some additional tools suggested to have on-hand when installing the
include:
1 box 4 pairCat3 orCat5 twisted pair
25 pair Amp cables (male-female)
25 pair Cat3 cable
89B-Brackets
B splice connectors or Scothlok
splicing connectors
Bridge clips
Butt set (T.S. if possible)
Chain for fishing walls
Computer with RS232
Cordless drill
Diagonal wire cutters
Digit grabber
Drill
Drywall screws
Electrical tape
Extension cord (three-
prong with ground)
Fiber rod for fishing walls
Fish tape
TM
Harmonica adapter
In-line adapter
Ladder
Level
Linesmen scissors
Long nose pliers
M1-66 split blocks
Modular crimping tool
(RJ-11 and RJ-45)
Preparation for DHS Installation
DHS
system
Multi-meter (fluke)
Permanent marker (0.8 mm,
0.5 mm for certain
applications)
Phillips head screwdrivers:
#1 x 4
#2 x 4
#2 x 6
Phone jacks
Punch Down Tool (110 and
66 Block Blades)
RJ11 plugs
RJ45 plugs
Standard screwdrivers:
1/8 x 4 in.
1/4 x 4 in.
3/16 x 6 in.
5/32 x 4 in.
Static/Ground Strap
Toner
Wand (Induction Amp)
Wire spools
Yellow 77 (lubricant for wire)
Advertisement
Table of Contents
