Table of Contents
Advertisement
4-12
Attendant
Description
One primary attendant is provided in the system for support of necessary services like
Line Recall, Forced Incoming Intercom Call Forward and Manual Night Service operation.
A second, or alternate, attendant position may be established for common sharing of
incoming CO calls or load sharing during peak traffic periods. The attendant position may
be occupied by any key telephone type. However, maximum efficiency is gained by use
of an Executive Key Telephone, since call handling is enhanced by use of system prompts
and messages.
The attendant may establish a private personal password for control of the system
service mode (Day/Night/Time), Time Of Day settings and System Speed Dial number
programming.
One valid station number must be assigned to serve as the attendant.
Conditions
The Attendant's personal 4-digit password is used by the attendant (or any other
station) to perform System Administration functions (Service Mode, Time of Day,
System Speed Dial programming).
Attendant Administration
Description
Attendant Administration is used to set the features Service Mode (Day/Night/Time),
System Date and Time, and System Speed Dial. You may enter into Attendant
Administration using the password of the assigned system Attendant telephone.
Operation
1. Press [FEAT]
2. Dial [#] + [0]. The display shows:
3. Dial the password.
4. Press [save]. The display shows:
5. You have three programming choices:
Station 10 is the default Attendant Position and is assigned CO line ringing for all CO lines
at default on the DHS, and on the DHS-E Station 100 has the same functions.
C HK
PS W D :__
bksp save
SE LE C T F U N C TI ON
svc
t ime
chg
spd
Attendant
Advertisement
Table of Contents
