Table of Contents
Advertisement
3-6
DHS-E Technical Specification Tables
Component
Customer Database memory protection
Ports:
CO/PBX/Centrex Lines
Digital Stations
Standard Single Line Telephones
DSS
DTMF Receivers:
2-Port Analog Adapter
2-Port Analog Expansion
Main Processor Board
DTMF Senders
Tone Detectors (Used to monitor call
progress tones; Busy Tone, Ring-back
Tone)
Contacts
Conference circuits
DISA circuits
System Attendants
Table 3-2: Digital Hybrid System Capacities
300 hr on a fully charged battery (the internal
Nicad/Nimh battery requires 14 hr, of continuous
system operation power be fully charged.)
18
48
94
(Note: one digital port must be reserved for
digital station operation. One digital station port
is used for every two SLT ports required (refer to
Table 3-1
24 (1 per station)
2 (One for each SLT port)
2 (One for each SLT port)
2 (Shared for advanced call processing system
features: DISA, ECF)
Unlimited. (DTMF signal generation is derived
from the core system tone resource. Tone
combinations are available as needed.)
2 (Shared for advanced call processing system
features; DISA, ECF, ABR. etc.)
1 LBC contact is available.
8 four-party conference circuits.
Any number of CO lines (to maximum
configuration) may be programmed for DISA
operation.
1 + 1 Alternate Position for overflow call handling.
DHS-E Technical Specification Tables
Description
).
Advertisement
Table of Contents
