Table of Contents
Advertisement
Do Not Disturb (DND)
Specific Line
To access a specific CO Line:
1. Lift handset
2. Dial [✳] + [3] + [c]
Where c = the CO line number/code for the desired CO line: 1-9 = CO lines (1-9),
0 = CO line 10, [✳] = CO line 11 and # = CO line 12.
Conditions
An SLT station may dial access any CO line that has been allowed in database
programming.
The dial codes 9 and 0 are mutually exclusive. When one or the other is programmed
as the Operator Code the remaining is assigned for out dialing at SLT stations. Dial
access 9/0 will access the highest available line regardless of line groups.
The CO line(s) permitted for outgoing selection in any CO line Group, or individually,
are dependent on the station programming for CO line access. Refer to
(Call
Do Not Disturb (DND)
Description
SLT stations may place their telephones in DND mode to avert incoming calls.
Operation
To set DND:
1. Lift handset.
2. Dial [#] + [4].
To cancel:
1. Lift handset.
2. Dial [#] + [4].
Conditions
Reminder Tone is heard each time the user goes off hook to make calls when DND is
active to remind the user of the DND condition.
When an SLT is in DND mode, DSS button LEDs at other stations will flash, (Refer to
Chapter 4, Keystation Features and Operation, "DND
Attendant)".
Calls to a station in DND will hear DND Tone.
"Call Operator
Override".
5-9
Advertisement
Table of Contents
