Table of Contents
Advertisement
Call Forward
To answer a Call Back:
1. When the Call Back process begins your, telephone will ring a special Call Back ring
for 30 seconds. The display will show:
2. Lift the handset or press [SPKR],
OR
Press [reply] to continue the Call Back. The display will show:
3. If you press [del] in Step 2, the Call Back will be canceled and the display will show:
To cancel a Call Back:
1. Press [FEAT]
2. Dial [✳] + [9] + [1]
Conditions
The station you are calling must be busy or in the Tone Ringing mode. Call Back will
be denied when there is already a Call Back request at the called station.
Only one Call Back may be initiated at a time.
To invoke Call Back at a station in Voice Call Allow mode, you must first Force Tone
Ringing. At an Executive Telephone, if the Call Back is not answered during the ring
reply time, the response message will be displayed until you press [reply] or [del].
The Call Back process begins when both your telephone and the called party's
telephone are hung up.
Call Forward
Display <FP3>
Description
When any type of station call forwarding is invoked, the LCD display will normally
indicate the call forwarding mode at all times. This enhancement has been made to make
the call forwarding mode display optional. The Call Forward Display defaults to ON.
Operation
1. Press [FEAT]
2. Then dial [#]+[6]
C AL L BAC K TO xx
reply
d el
C AL L I NG STA x x
cb ck msg
C AL L BAC K DE LE TE
4-19
Advertisement
Table of Contents
