Table of Contents
Advertisement
Flexible Receive Assignment
Flexible Receive Assignment
Description
Stations may be allowed to answer or retrieve from hold, specific CO lines assigned in
system programming. Receive assignments should be assigned to any stations that need
to answer incoming calls. A station does not have to hear ringing or be programmed with
Flexible Ring Assignment in order to answer an incoming CO line. Also, Call Pickup can be
used to answer the oldest incoming CO calls. During System Night Service operation,
Night Service stations will ring and can answer all incoming CO lines, regardless of the
normal Day mode configuration.
Flexible Ring Assignment
Description
A station can be programmed to ring for any, or all incoming CO lines. The Ring
Assignment will not establish ringing at any station that does not also have the Receive
Assignment enabled for the associated incoming CO line. In this situation, the CO line
appearance would provide a visual indication only, without the ability to answer the
incoming call by Direct Line Button Access. A designated Night Service station will
receive audible ringing and can answer all lines when the system is operating in the
Night Service mode.
Forced Intercom Call Forward
Description
Tone ringing intercom calls can be immediately forwarded to the attendant by pressing
the DND button.
Operation
1. When your telephone is set to Tone Ring and another station is calling you, an
Executive Telephone will display:
2. Press [FEAT]
3. Dial [4]. An Executive Telephone will display:
STA xx CA L LI N G
DO N OT D IST UR B
4-59
Advertisement
Table of Contents
