Table of Contents
Advertisement
Resource Configuration
System Time
Provided to set system time and date information. Use the prompts displayed to set the
fields:
YEAR
MONTH
DAY
WEEKDAY
HOUR
MINUTE
Account Code Table
When a station is Forced Account Code (must enter an account code to dial any outside
telephone number), the account code entered is verified against the entries in this table.
Up to 100 entries may be made in the Account Code Table. The account code length may
be 4-8 digits in length to increase the security of valid Account Code Entry.
Default
The
DHS/DHS-E
Account Code data field ranges are:
Length = 4-8 digits
allowable number entries = 0000-99999999
Directory Dial <FP3>
The DHS system provides locations for up to 200 names each consisting of a maximum of
12 characters. Directory Dial also enables users to program a name along with a speed
dial bin for use in later locating a speed dial number. The system displays the name
associated with a speed dial number on the LCD display so that when the desired name is
shown, the user may then have the system dial the number.
Default
Each name entered into Directory Dial can be up to 12 characters. Directory Dial will
accept up to 200 names.
Distinctive Ringing <FP3>
You may choose from four distinctive ringing tones to signal incoming calls. This allows
you to easily distinguish your calls from calls ringing at other stations near you.
Default
Defaults to the first of four distinctive ringing tones.
System Time can be set through Attendant Administration using the Attendant Station
password.
Account Code length is 4 digits, and Bins (001-100) are EMPTY. The
6-35
Advertisement
Table of Contents
