5-6
Cancel
1. Lift handset
2. Dial [#] + [2]
Direct (All Call)
1. Dial [#] + [2] + [2] + [xx]
Where:
xx = destination desired
Follow Me Forward
1. Dial [#] + [2] + [3] + [ss] + [pppp]
Where:
ss = station number to forward to this location
pppp = password of the station to forward
Idle
1. Dial [#] +[2] + [0] + [xx]
Where:
xx = destination desired
No Answer
1. Dial [#] + [2] + [4] + [xx] + [t]
Where:
xx = destination desired
t = time to ring before forwarding; 0 =10 seconds, 1= 20 seconds, 2 = 30 seconds, 3
=40 seconds and 4 =50 seconds).
Call Operator (Call Attendant)
Description
The system Attendant station may be easily called by one dialed digit code. At default,
this code is 0.
Operation
1. Lift handset
2. Dial [0]
Conditions
The code dialed for the system attendant (0 or 9) is dependent on Database
Programming of Operator Code. If 9 is programmed, that is the code that must be
used to call the system attendant.
The Operator access code (0 or 9) is mutually exclusive with the outside CO line
access code.
Call Operator (Call Attendant)