Private To; Toll Override; Distinct Tone <Fp3; Iclid Port - Vodavi Starplus DHS Technical Manual

CO Line Configuration

Private To

Private To is a programming time saver. This parameter allows the programmer to assign
a specific CO to one station for their personal exclusive use. This setting over-rides CO
Line Assignment programming. When a station is assigned as the Private To station of a
CO line, that station exclusively receives ringing and access privileges to that CO line.
Default
The DHS/DHS-E
is from 10-81, and the DHS-E Station range is from 100-195.

Toll Override

Any CO line may be marked Toll Override Y. When set to Y a restricted station may access
that CO line and dial out.
Default
The DHS/DHS-E
Distinct Tone <FP3>
Distinctive Tones can be used to identify a particular CO line while ringing. There are five
distinctive tones that can be programmed. The default setting 0 indicates that there is no
distinct tone programmed. CO distinctive tone settings override station distinctive
ringing.
Default
The DHS/DHS-E
programmable from 0/1/2/3/4.

ICLID Port

When Incoming Caller ID is provided by the servicing telephone company, the caller data
may be retrieved at the CO line interface and delivered to the Starplus
an external Caller ID device connected to the Option Module ICLID/PC Programming
RS232 port. This external (optional) device must be configured in the
associate the line circuit number from the unit to the
with the caller ID line. Each
company caller ID must be programmed with an associated ICLID device port number.
The default value 0 indicates that no caller ID will be received on this CO line.
Default
The DHS CO Lines (1-12), and DHS-E CO Lines (700-717) are set for [0] not associated with
an ICLID Port number.
Related Programming
Refer to "Wait (ICLID)"
Private To is Empty (not assigned to any stations). The DHS Station range
Toll Override is marked N (NO).
has no Distinctive Tone programmed, and the Distinctive Tone setting is
DHS/DHS-E
Wait_ICLID time in Call Handling must also be programmed to allow the
systems to collect the caller ID data before ringing any system telephones. In addition, ICLID
requires Telephone Company service and an (SP7081-00) ICLID Cable.
DHS
ICLID use on the requires the Option Module.
and "RMT X_RATE".
DHS/DHS-E
CO line circuit that is to be used with telephone
6-19
DHS/DHS-E KSU via
DHS/DHS-E to
line position to be used
DHS/DHS-E