Table of Contents
Advertisement
3-20
3. Installing 3 x 8 Modules
Modem
3 x 8
Module
The
DHS-E
requires one 25-pair amphenol type (male) ended station cable to extend the interface
ports to the MDF. The station cable is plugged into the female amphenol connector at
the base (orientation assumes a properly mounted KSU) of the 3 x 8 module.
The 6-Port CO Module CANNOT be used in the
Figure 3-4:
comes with two pre-installed 3 x 8 modules. Each additional 3 x 8 module
DHS-E
DHS-E
CPU Board
DHS-E Installation
system.
System Software
PC
Program/ICLID
BGM
MOH
Page
Loud Bell
BGM Potentiometer
SMDR
MOH Potentiometer
SW1
Initialize
EXP Potentiometer
Advertisement
Table of Contents
