Table of Contents
Advertisement
4-64
Line appearance is not required for station to put call on hold.
Exclusive
Description
When using the [FEAT] button and the [HOLD] button together, you may place an
outside call on private hold. The held line will appear in use at other stations.
Operation
1. Press [FEAT]
2. Press [HOLD]
Conditions
When you place a CO line call on Exclusive Hold, the green lamp for that line at your
telephone will flash fast and the red lamp will light steady at other stations.
A CO line call will be placed on System Hold after the Exclusive Hold time expires. You
will hear a tone alerting you that the timer has expired and your call is now on System
Hold. The green lamp at your telephone will flash slowly and the red lamp at other
stations will begin to flash slowly.
Exclusive Hold is used only for CO line calls.
The Exclusive Hold duration is programmable from 1-8 minutes in system
programming.
Reminder Time
Description
The system provides a programmable timer to remind you that a call has been left on
System or Exclusive Hold. When enabled, you will hear one ring tone repeated each time
the selected time expires.
Conditions
Hold Reminder applies to both intercom and CO line calls.
Hold Reminder applies to CO line calls that are on System Hold, Exclusive Hold or
Screened Transfer Hold.
System
Description
You may place any CO line on System Hold by one button operation of [HOLD]. When
you place a line on System Hold, the green lamp for that line will flash at the I-Hold rate.
This System Hold line will flash the red lamp at all other stations.
The Hold Reminder time is system programmable and can be set for: 0 (disabled), 10, 30,
60, 90 seconds.
Hold
Advertisement
Table of Contents
