Voice Over Busy - Vodavi Starplus DHS Technical Manual

Voice Over Busy

Conditions
You may press [MUTE] while monitoring a call to be connected to the caller.
When you answer a call the programmed Disconnect Digits Table digits are sent to
the voice mail port.
You will hear the alert tone regardless of whether your telephone is idle or busy or in
speakerphone or handset mode.
When the new timer VM MON TIME expires the opportunity to invoke the feature has
past.
The new timer VM MON TIME is added to the Call Handling category of programming
and will allow (10/20/30/40/60) second duration to be programmed.
When you use the VM Monitor feature, a conference is established between yourself,
the voice mail port associated to the call, and the caller leaving the voice mail
message.
If you are on a call when the VM Monitor alert tone signals you, you may place the call
on hold to enable the VM Monitor feature.
You may exit the VM Monitor mode by hanging up the handset, pressing [SPKR], or
pressing [CLEAR].
You may monitor only one call at a time.
Voice Over Busy
Description
If your telephone is busy you may still receive a voice announcement from a calling
station. For instance, while you are on the telephone speaking with person (A), a person
at another telephone on the system person (B) may call you and be heard. Person (A) will
not hear person (B) voice announcement to you. Upon receiving the Voice Over Busy, you
may choose to speak with person (B) or reject the Voice Over Busy request.
Operation
Basic and Enhanced Telephones
To place a Voice Over Busy:
1. After dialing a busy station and listening to busy tone, press [FEAT].
2. Dial [5] + [6]
To reject a Voice Over Busy:
1. Press [FEAT]
2. Dial [5] + [6]
4-101