I-Use Indication; Intercom Call - Vodavi Starplus DHS Technical Manual

4-66

I-Use Indication

Description
When you are using a CO line, the associated lamp will light green and flash at a double-
wink rate at your telephone. This lamp will light steady red at other telephones.

Intercom Call

Description
All intercom calls are made by dialing the station unique 2-digit
intercom number. If a station feature button is programmed as a BLF/DSS button, it may
be used to place an intercom call. Any intercom call can be placed hands-free without
lifting the handset. However, acoustic conditions at the local and/or distant station may
dictate the use of the handset to achieve optimum voice connection.
Each station user determines how intercom calls are received; either in Voice Announce
Hands-Free mode, Voice Announce Privacy mode, or Tone Ringing. The intercom calling
station can force the called station from Voice Announce mode to Tone Ring mode by
pressing [✳] after dialing the station number.
Operation
To place an ICM call:
1. Dial the
2. Ringback tone is heard or if the called station is in Voice Announce mode, a
connection is automatically selected.
3. If the called station is busy, busy tone is heard.
4. If the called busy station has Call Wait enabled, ringback tone is heard.
DHS DHS-E
2-digit or
CAL L I NG STA xx
cbck msg
VOIC E C ALL
ms g
STA xx
cbck msg
STA xx
cbck msg
3-digit station number on the telephone dial pad.
xx
BUS Y
nex t
WA IT
I-Use Indication
DHS DHS-E
or 3-digit