Table of Contents
Advertisement
On Hook Dialing
On Hook Dialing
Description
You may make outgoing calls without lifting the handset and monitor the dialing status
through the built-in speaker. The [SPKR] button lamp is lit when monitoring a call.
The Basic key telephone can monitor outside calls and receive one-way paging
announcements, but cannot reply unless the handset is lifted. The Enhanced and
Executive models provide full hands-free speakerphone operation in addition to On-
Hook Dialing.
Operation
1. Press a [CO line] to make a call or dial a [station number] while on hook (handset
hung up).
Page
Description
You can perform several types of pages:
Internal Paging - page a group or place a system-wide internal page.
External Paging - access external/ancillary paging equipment.
All Call Paging - access all paging zones (internal and external).
Operation
Basic and Enhanced Telephones
To perform internal paging:
1. Press [FEAT].
2. Dial [5] + [0] + [0].
To perform external paging:
1. Press [FEAT].
2. Dial [5] + [0] + [1].
To perform All Call paging (internal and external):
1. Press [FEAT].
2. Dial [5] + [0] + [2].
When On-Hook Dialing, the type of line accessed depends upon the individual key
telephone pre-programmed selection of intercom, CO line, or no selection (EMPTY).
Paging is one-way only. The Page Allow/Deny setting does not interfere with a station's
ability to make a page or to establish a Meet Me page.
4-77
Advertisement
Table of Contents
