Table of Contents
Advertisement
Preparing the product for use
Storage conditions
•
Store the power wheelchair in a dry, enclosed room with sufficient air circulation and protection from external
influences. Specific information about storage conditions: see page 45.
•
Protect the wheels against ground frost, for example by taking all weight off them using an assembly stand or
by setting them onto wooden blocks.
•
Maintain sufficient clearance from sources of heat. If the product is parked for an extended period of time or
the tyres overheat (e.g. in the vicinity of radiators or in case of exposure to strong sunlight behind glass), the
tyres may become permanently deformed.
•
Rotate the wheels weekly to prevent flat spots from extended standing.
•
For extended storage, store the power wheelchair so the wheels are not in contact with the ground.
Note regarding the tyres
•
If the power wheelchair is not moved for several days, permanent colour changes may develop where it comes
into contact with the ground. A suitable base should therefore be used when parking it for extended periods of
time.
•
Avoid unnecessary parking outdoors. Direct exposure to sunlight/UV radiation causes the tyres to age more
quickly. As a result, the tread surface hardens and corner pieces break out of the tread.
The tyres must be changed when the tread is less than 1 mm (0.04") to ensure safe driving behaviour.
•
The tyres should be replaced every 2 years regardless of wear and tear.
•
•
When power wheelchairs with PU tyres are parked for longer periods, the tyres may become deformed (flat
spots). This deformation will go away on its own over time while driving.
6 Preparing the product for use
6.1 Safety instructions
General hazards while putting into operation
WARNING
Improper handling of packaging materials
Risk of suffocation due to neglect of the duty to supervise
► Packaging materials must be kept out of the reach of children.
WARNING
Uncontrolled movement of components when making adjustments
Crushing, pinching, blows due to non-observance of the maintenance and repair instructions
► Ensure that body parts, such as hands or head, are never in the danger zone.
► Perform the work with the aid of a helper for support.
WARNING
Independent modification of settings
Serious injuries to the user due to improper changes to the product
► Do not modify the settings established by the qualified personnel. Only the settings described in the section
"Use" in these instructions for use may be adjusted independently.
► In case of problems with the settings, please contact the qualified personnel who adjusted your product.
CAUTION
Screw connections not tightened
Pinching, crushing, tipping over, falling of user due to assembly errors
► After all adjusting/readjusting work authorised by the manufacturer, retighten the mounting screws/nuts firmly.
Observe any torque settings which may be specified.
6.2 Initial operation
The qualified personnel delivers the power wheelchair fully assembled and in operational condition.
The following additional tasks may be required:
•
Connecting the battery cable (see page 13)
12
490E163=*
Advertisement
Table of Contents
