Final Reduction Disassembly; Final Reduction Inspection - KYMCO SUPER 9 50 Service Manual

8
. FINAL REDUCTION
SUPER 9 50
Bolts
FINAL REDUCTION
DISASSEMBLY
Remove the rear wheel. ( 14-2)
Remove the left crankcase cover. ( 7-2)
Remove the clutch/driven pulley. ( 7-11)
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover
attaching bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Remove the final gear and countershaft.
Driver shift
Dowel Pin
Final Gear
Countershaft
Dowel Pin

FINAL REDUCTION INSPECTION

Inspect the countershaft and gear for wear
or damage.
Countershaft
8-2