Final Reduction Disassembly; Final Reduction Inspection - KYMCO Super 8 50 Service Manual

10
. FINAL REDUCTION
Super 8 50
Bolt

FINAL REDUCTION DISASSEMBLY

Remove the rear brake cable. (  13-3)
Remove the rear wheel. (  13-2)
Remove the left crankcase cover. (  9-2)
Remove the clutch/driven pulley. (  9-10)
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover attaching
bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Drive Shaft
Remove the final gear and countershaft.
Final Gear Countershaft

FINAL REDUCTION INSPECTION

Inspect the countershaft and gear for wear or
damage.
Countershaft
Inspect the final gear and final shaft for wear,
damage or seizure.
Final Shaft
10-2