Polycom CX5500 Administrator's Manual page 79

Polycom CX5500 Unified Conference Station Administrator's Guide
The contact directory is the central database for several phone features including speed dial (see
Configure the Speed Dial
Treatment), and presence (see
the directory parameters you can configure. The CX5500 system supports up to 999 contacts. If you want
to conserve phone memory, you can configure the phones to support a lower maximum number of
contacts.
Tip: Deleting the Per-Phone Contact Directory
If you created a per-phone <MACaddress>-directory.xml for a phone and you want that phone to
use a global contact directory 000000000000-directory.xml, remove the
<MACaddress>-directory.xml file you created from the server.
Use the Local Contact Directory
Central Provisioning Server
Enable or disable the local contact directory
Specify if the local contact directory is read-only
Specify the maximum number of contact entries for each phone
Specify whether to search the directory by first name or last name
The template contact directory file
Polycom, Inc.
Feature), distinctive incoming call treatment (see
Use the Presence Feature. The table Use the Local Contact Directory
template >
features.cfg
features.cfg >
features.cfg>
features.cfg >
000000000000-directory~.xml
Distinctive Incoming Call
parameter
>feature.directory.enabled
dir.local.readonly
dir.local.contacts.maxNum
dir.search.field
1.1.0
lists
79