Polycom CX5500 Administrator's Manual page 42

Polycom CX5500 Unified Conference Station Administrator's Guide
Name
Server Type
The protocol that the phone will use to write to the syslog server. If set to None (or 0), transmission is turned off,
but the server address is preserved.
Facility
A description of what generated the log message. For more information, see section 4.1.1 of RFC 3164.
The default value is 16, which maps to local 0.
Render Level
Specifies the lowest class of event that will be rendered to syslog. It is based on log.render.level and can
be a lower value. See <log/>.
Note: Use left and right arrow keys to change values.
Prepend MAC Address
If enabled, the phone's MAC address is prepended to the log message sent to the syslog server.
Polycom, Inc.
Possible Values
None=0, UDP=1, TCP=2, TLS=3
0 to 23
0 to 6
Enabled, Disabled
1.1.0
42