Example Quick Setup Configuration; Provisional Polling Of The Cx5500 System - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide

Example Quick Setup Configuration

To enable the Quick Setup feature, enable the prov.quickSetup.enabled parameter in the site.cfg
template file, shown next.
The QSetup will display on the phone screen. Press the QSetup soft key to open the menu and access
the quick setup feature.

Provisional Polling of the CX5500 System

You can configure how your phone provisioning automatically by configuring the parameters in the table
Provisional Polling of the CX5500
You can set the phone's automatic provisioning behavior to be:
●
Absolute The phone polls at the same time every day.
●
Relative The phone polls every x seconds, where x is a number greater than 3600.
●
Random The phone polls randomly based on a time interval you set.
○ If the time period is less than or equal to one day, the first poll is at a random time, x, between
the phone starting up and the polling period. Afterwards, the phone will poll every x seconds.
Polycom, Inc.
System.
1.1.0
155