Polycom CX5500 Administrator's Manual page 296

Polycom CX5500 Unified Conference Station Administrator's Guide
Sampled Audio File Number
8
9
10
11
12 to 24
<se/>
The table Sound Effect Parameters
sound effect patterns in
chord-sets, see <chord/>) and sampled audio sound effects. Sound effects are defined by patterns:
rudimentary sequences of chord-sets, silence periods, and wave files.
Sound Effect Parameters
Parameter
1
se.appLocalEnabled
If set to 1, local user interface sound effects such as confirmation/error tones, will be enabled.
se.destination
The transducer or audio device that plays sound effects and alerts. Choose from the chassis (speakerphone),
headset (if connected), handset, or the active destination. If active, alerts will play from the destination
that is currently in use. For example, if you are in a call on the handset, a new incoming call will ring on the
handset.
se.stutterOnVoiceMail
If set to 1, a stuttered dial tone is used in place of a normal dial tone to indicate that one or more voicemail
messages are waiting at the message center.
Polycom, Inc.
Default Use (Pattern Reference)
Ringer 19 (se.pat.ringer.ringer21)
Ringer 20 (se.pat.ringer.ringer22)
Ringer 21 (se.pat.ringer.ringer23)
Ringer 22 (se.pat.ringer.ringer24)
Not Used
lists configurable sound effect parameters. You can also configure
<pat/> and ringtones in <rt/>. The phone uses both synthesized (based on the
Permitted Values
0 or 1
chassis, headset, handset, active
0 or 1
1.1.0
Default
1
1
1
296