Enable Last Call Return; Example Configuration For Last Call Return - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
To retrieve a parked call, go off-hook and press the Retrieve soft key, or tap New Call soft key, enter the
call orbit number, and tap Call.

Enable Last Call Return

The phone supports redialing of the last received call. The table
parameters to enable this feature. This feature requires support from a SIP server. With many SIP
servers, this feature is implemented using a particular star code sequence. With some SIP servers,
specific network signaling is used to implement this feature.
Enable Last Call Return
Central Provisioning Server
Enable or disable last call return
Specify the string sent to the server for last-call-return

Example Configuration for Last Call Return

The configuration parameters for last call return feature are located in two template files. You can enable
the feature using the features.cfg template file and configure the feature using the sip-interop.cfg file.
In the following configuration example, the last call return feature has been enabled in the features.cfg
template file:
Polycom, Inc.
Enable Last Call Return
template > parameter
features.cfg > feature.lastCallReturn.enabled
sip-interop.cfg > call.lastCallReturnString
1.1.0
shows you the
104