Example Provisional Polling Configuration - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
○ If you set the polling period to be greater than one day with the period rounded up to the nearest
day, the phone polls on a random day based on the phone's MAC address, and within a random
time set by the start and end polling time.
For example:
If prov.polling.mode is set to rel and prov.polling.period is set to 7200, the phone polls
●
every two hours.
If prov.polling.mode is set to abs and prov.polling.timeRandomEnd is set to 04:00, the
●
phone polls at 4am every day.
If prov.polling.mode is set to random, prov.polling.period is set to 604800 (7 days),
●
prov.polling.time is set to 01:00, prov.polling.timeRandomEnd is set to 05:00, and you
have 25 phones, a random subset of those 25 phones, as determined by the MAC address, will poll
randomly between 1am and 5am every day.
● If prov.polling.mode is set to abs and prov.polling.period is set to 2328000, the phone
polls every 20 days.
Provisional Polling of the CX5500 System
Central Provisioning Server
To enable polling and set the mode, period, time, and time end parameters

Example Provisional Polling Configuration

The following illustration shows the default sample random mode configuration for the provisional polling
feature in the site.cfg template file. In this setup, every phone will poll once per day, between 1 and 5 am.
Polycom, Inc.
1.1.0
template > parameter
site.cfg > prov.polling.*
156