Change Configuration Parameter Values - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
enumerated type), permitted values, default values, and all valid enumerated type values. View this
template file with an XML editor.
A string parameter, boolean, and enumerated parameters are shown in the following figures
Parameter, Boolean Parameter, and
String Parameter
Boolean Parameter
Enumerated Parameter

Change Configuration Parameter Values

The configuration parameters available in the UC Software use a variety of values, including Boolean,
integer, enumerated types, and arrays (a table of values). Each parameter available in the UC Software is
listed in alphabetical order in Configuration Parameters, along with a description, the default value, and
the permissible values.
Note that the values for boolean configuration parameters are not case sensitive. The values 0, false,
and off are inter-changeable and supported. The values 1, true, and on are interchangeable and
supported. This Administrator's Guide documents only 0 and 1.
The following rules apply when you set a parameter with a numeric value outside of its valid range:
If the configuration file's value is greater than the allowable range, the maximum value is used.
●
If the configuration file's value is less than the allowable range, the minimum value is used.
●
Polycom, Inc.
Enumerated Parameter.
1.1.0
String
57