Polycom CX5500 Administrator's Manual page 192

Polycom CX5500 Unified Conference Station Administrator's Guide
Tip: Resetting a User's Password
You can reset a user's password by removing the password parameter from the override file. This
will cause the phone to use the default password in the <user>.cfg file.
After you complete these procedures, update the phone's configuration to affect your changes. The User
Profile feature will be ready to use.
User Profile Parameters
Central Provisioning Server
Enable or disable the user profile feature
Specify the amount of time before a non-default user is logged out
Specify the default password for the default user
Specify if the phone can have users other than the default user
Specify the name of the default user
Specify the password used to validate the user login
Specify if a user should remain logged in after the handset reboots
Specify if a user must log in while the feature is enabled
Create a Phone Configuration File
Create a phone configuration file for the User Login feature, and then add and set the attributes for the
feature. Or, if you already have a phone configuration file, update the file to include the User Login
parameters you want to change.
Tip: Creating a Default User Password for All Users
Polycom recommends that you create a single default user password for all users.
To define the feature's settings:
1 Create a site.cfg file for the phone and place it on the provisioning server.
You can base this file on the sample configuration template that is in your software package. To
find the file, navigate to <provisioning server location>/Config/site.cfg.
2 In site.cfg, open the <prov.login/> attribute, and then add and set values for the user login
attributes.
Polycom, Inc.
template > parameter
site.cfg > prov.login.enabled
site.cfg > prov.login.automaticLogout
site.cfg > prov.login.defaultPassword
site.cfg > prov.login.defaultOnly
site.cfg > prov.login.defaultUser
site.cfg > prov.login.localPassword
site.cfg > prov.login.persistent
site.cfg > prov.login.required
1.1.0
192