Polycom CX5500 Administrator's Manual page 338

Unified conference station for microsoft lync
Hide thumbs Also See for CX5500:
Table of Contents

Advertisement

Polycom CX5500 Unified Conference Station Administrator's Guide
Parameter
voIpProt.SIP.alertInfo.x.class
Alert-Info fields from INVITE requests will be compared against as many of these parameters as are specified
(x=1, 2, ..., N) and if a match is found, the behavior described in the corresponding ring class is applied.
voIpProt.SIP.alertInfo.x.value
A string to match the alertinfo header in the incoming INVITE.
voIpProt.SIP.allowTransferOnProceeding
If set to 0, a transfer is not allowed during the proceeding state of a consultation call.
If set to 1, a transfer can be completed during the proceeding state of a consultation call.
If set to 2, phones will accept an INVITE with replaces for a dialog in early state. This is needed when using
transfer on proceeding with a proxying call server such as openSIPS, reSIProcate or SipXecs.
voIpProt.SIP.authOptimizedInFailover
If set to 1, when failover occurs, the first new SIP request is sent to the server that sent the proxy authentication
request.
If set to 0, when failover occurs, the first new SIP request is sent to the server with the highest priority in the
server list.
If reg.x.auth.optimizedInFailover set to 0, this parameter is checked.
If voIpProt.SIP.authOptimizedInFailover is 0, then this feature is disabled.
If both parameters are set, the value of reg.x.auth.optimizedInFailover takes precedence.
voIpProt.SIP.CID.sourcePreference
Specify the priority order for the sources of caller ID information. The headers can be in any order.
If Null, caller ID information comes from P-Asserted-Identity, Remote-Party-ID, and From in that order.
The values From,P-Asserted-Identity, Remote-Party-ID and P-Asserted-Identity,From,
Remote-Party-ID are also valid.
voIpProt.SIP.compliance.RFC3261.validate.contentLanguage
If set to 1, validation of the SIP header content language is enabled. If set to 0, validation is disabled.
voIpProt.SIP.compliance.RFC3261.validate.contentLength
If set to 1, validation of the SIP header content length is enabled.
voIpProt.SIP.compliance.RFC3261.validate.uriScheme
If set to 1, validation of the SIP header URI scheme is enabled. If set to 0, validation is disabled.
voIpProt.SIP.conference.address
If Null, conferences are set up on the phone locally.
If set to some value, conferences are set up by the server using the conferencing agent specified by this
address. Acceptable values depend on the conferencing server implementation policy.
Polycom, Inc.
Permitted
Default
Values
see the list of
default
ring classes in
<rt/>
string
Null
0, 1, 2
1
0 or 1
0
ASCII string up
Null
to 120
characters long
0 or 1
1
0 or 1
1
0 or 1
1
ASCII string up
Null
to 128
characters long
1.1.0
338

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CX5500 and is the answer not in the manual?

Table of Contents